Untitled Document
Untitled Document




 
Home > Used equipment

Used equipment


 Used equipment

 

Item No : AP-JCO_DSAW_HSAW-120323-DH
Name of equipment : Pipe mill, Pilger mill, Welded I,T,H-beam line, JCO,DSAW, HSAW pipe mill, Bar straightenner & peeler
Specifications : Pipe mill, Pilger mill, Welded I,T,H-beam line, JCO,DSAW, HSAW pipe mill, Bar straightenner & peeler
Contents :

We, MTi has below equipments as inventory, if you have in interesting in a item, pls contact us with item number, well send you detail technical specification and photos in short.


E-mail address: jaewoo707@gmail.com, mti@mti21.com


 


D. SEAMLESS PIPE PLANT, PILGER MILL


 


D1. COMPLETE SEAMLESS PIPE MAKING PLANT CONSIST OF


             Furnaces


             Piercing Assel Mill


             Sizing Rolling Mill- rolled billets diameter 127 – 273 mm


             Calibrating Mill               - consists of 5 stands


-       purposed for calibration of tube billets diam.152 – 273 mm


             Stretch Reducing Mill     - consists of 9 stands


-       purposed for reducing tube billets diam.127 – 152 mm


             Cooling table


             2 Straighteners


             Total weight of the equipment – 3000 tons


 


D2. MANNESMANN – MEER KPW 75 PILGER MILL


             Built:                               1975


             Hollow Diameter:           40 – 77.5 (80mm)


             Hollow Wall Thickness: 2.5 - 13mm


             Rolled Tube Diameter:   20 - 60mm


             Rolled Tube Wall Thickness: 1.2 – 8.5mm


             Die Type:                       Full Ring


 


 


E. 2500 MM WIDTH REINFORCEMENT OF CONCRETE WIRE MESH MAKING LINE


             LINE BUILT NEW:         2002


             ROD DIA:                      4.0 – 10.0 MM


             MESH SIZE:                  100 X 50, 100 X100, 150 X 50, 200 X 200 MM


             PANEL SIZE:                 (4,000 – 6,000) X (1,250 – 2,450) MM


             WIRE GEOMETRY WITH PERIODIC PROFILE: ACCORDING TO SR 438-4/1998


             THE LINE CONSIST OF FOLLOWING EQUIPMENTS


VERTICAL PAYOFF UNIT


LINEWIRE STRAIGHTENING BANKS


LOOP ACCUMULATOR


BACK TENSION ROLLER SYSTEM


AUTOMATIC MESH WELDING MACHINE


ROTARY LINEWIRE FEEDER UNIT


OFF-COIL CROSSWIRE FEED SYSTEM


AUTOMATIC MESH SHEAR


 


 


F. WELDED  I, T & H BEAM LINE


 


THE LINE IS CAPABLE OF WELDING A BEAM IN THE FOLLOWING CAPACITIES FROM COILED STRIP.


THE THREE COILS ARE FEED INTO A CAGE FORMING SECTION AND THEN WELDED TOGETHER.


THE BEAMS ARE CUT BY A TRAVELLING FRICTION SAW.


            


PRODUCTS SIZE


WEB THICKNESS: 4.75 TO 9.5 mm (0.187" TO 0.375")


FLANGE THICKNESS: 4.75 TO 12.5 mm (0.187" TO 0.500")


I-BEAM LENGTH:   6 TO 18 m (19.6' TO 59')


I BEAM HEIGHT:    100 TO 500 mm (4" TO 20")


FLANGE WIDTH:    100 TO 300 mm (4" TO 12")


 


 


G. JCO, ROLL BENDER, SPIRAL, ERW: Pipe Mill


 


G1. HEAVY WALL THICKNESS DSAW PIPE MAKING PLANT WITH 6200 TON JCO PRESS


             PIPE DIA:                      MAX 56


             WALL THICKNESS :     50 MM MAX


             PIPE LENGTH:             12.200 MM MAX


             THE PLANT CONSISTS OF:


6200 TON JCO FORMING PRESS


3000 TON REFORMING PRESS


TACK WELDING M ACHINE


INSIDE WELDING MACHINE (2 POLE, 2 UNITS),


OUTSIDE WELDING MACHINE (2 POLE, 2 UNITS),


OUTSIDE WELDING MACHINE (3 POLE, 1 UNIT)


THE EQUIPMENTS ARE BRAND NEW, NEVER INSTALLED, STORED IN THE WAREHOUSE.


 


G2. COMPLETE HEAVY GAUGE PIPE PLANT WITH 3 ROLL BENDER


Material: Q235, Q345, ASTM A53, A134, A139, A252, A671 All Grade, A672 All Grade, API 2B, API 5LB, X42, X52, X60, X65


Grade:                           API 5L X GRADES


MAX THICKNESS        30 MM


MAX LENGTH               12 METER


             PIPE DIA:                      558 MM – 2082 MM,


            


             PLANT CONSIST OF


EDGE MILLING M/C


3 ROLL BENDER


POST BENDING M/C


TACK WELDING M/C


INSIDE WELDING M/C


OUTSIDE WELDING M/C


4 WAY PSR M/C


END FACING M/C


HYDRO TESTER


X-RAY INSPECTION M/C


PIPE AUTO MEASURING M/C


PIPE TRANSPORT EQUIPMENTS.


 


G3. DSAW HEAVY WALL PIPE BENDING PLANT WITH 3 ROLL BENDER


             WALL THICKNESS:     6-45 MM


             PIPE LENGTH:             6 M MAX


             PIPE DIA:                      450 – 4500 MM


            


PLANT CONSIST OF


PLATE CUTTING AND BEVELLING M/C


EDGE BENDING PRESS (2000 TON),


3 ROLL BENDER


TACK WELDER & REFORMER


INSIDE WELDER,


OUTSIDE WELDER


PIPE JOINING WELDER.


 


G4. 16 DIAMETER WEAN/DAMIRON API PIPE MILL


Products grade:             API 5L/EN


DIA:                                8-16


             WALL THICKNESS:      4.0 – 12.7 MM


             LENGTH:                       UPTO 14 METER


 


G5. COMPLETE BYARD 2500 MM DIA SPIRAL WELDED PIPE MILL


             PIPE DIA:                      457 – 2500 MM


             WALL THICKNESS:      5 – 25.4 MM


             STEEL GRADE:            API 5L X70


 


G6. COMPLETE BYARD 3000 API PW SPIRAL WELDED PIPE MILL


             PIPE DIA:                      600 – 3200 MM


             WALL THICKNESS:      6 – 25.4 MM


             STEEL GRADE:            API 5L X70


 


 


H. BAR STRAIGHTENERS AND PEELERS


 


H1. CALOW DMH 13, 325 MM DIA BAR PEELING LINE


             Built:                               1974


             Model:                            DMH13


             Diameter Range:           105 – 325mm


             Bar Length:


Without Polishing Head: 2,800 – 12,000mm


With Polishing Head: 4,000 – 12,000mm


 


H2. KIESERLING DDSF 20/50 COIL-TO-COIL/COIL-TO-BAR PEELING LINE


             Built:                               1974 (Rebuilt by Schumag 1983, Revamped 1996)


             Raw Diameter Range:   6.5 – 22mm


             Finished Diameter Range: 6 – 21mm


             Speeds:                          5 – 50 m/min


 


H3. DAISHO, 285 MM DIA BAR PEELING MACHINE


             Year:                              1978


             Income bar diameter:    155-285mm


             Exit bar diameter:          150-280mm


 


H4. CBX 180 MM BAR PEELING MACHINE


             Min/ max raw bar diameter: 80/180 mm


             Min / max bar length:     4000- 20000 mm


             Advance speed:             0.5 – 10 m/min


 


H5. DAISHO SEIKI 12 -32 MM DIA BAR PEELER


             TURNING DEPTH DIA: 0.5 MM/DIA – MIN


                                                    2.5 MM/DIA – MAX


             CUTTING SPEED:        70-140 M/MIN


             THROUGHOUT SPEED: 1.3 – 20 M/MIN


 


H6. 280 MM DIA 2 ROLL BAR STRAIGHTENING MACHINE


             Year:                              1980


             Bar diameter:                 80 – 280 mm


             Straightness of incoming bar: 15 mm/m


             Straightness of final bar: 1mm/m


             Straightening speed:      10 – 30 m/min


 


H7. 2 ROLL, 180 MM DIA ROUND BAR STRAIGHTENER


             Year:                              1985


             Max. straightening dia.: 180Mm for 75daN/mm2 steel strength

<P style="MARGIN: 0cm 0cm 0pt
Read :
1,364
Date :
2012-03-23
 [Prior]   LSAW type Large sized Pipe Mill Plant  2012-03-08
 [Next]   1600 mm HSAW Pipe Mill Line  2012-05-25


Business and trading between the MTi(Seller) and the Buyer for not mentioned will be applied with attachment, Supplementary Terms and Conditions of Sale by MTi. Please check attachment.



Untitled Document
 
ABOUT US
Greeting
History
Company Ideology
Organization
Certificates
Customers
Location
Steel Making Equipment
Hot Rolling Mill
Cold Rolling Mill
Coil Processing Line
Revamping
Shipbuilding Equipment
De-scaling Line
Cutting Shop
Bending Shop
Pipe Shop
Hull Shop
Shot Blast Shop
Paint Shop
Shiplift
Floating Dock
Shipyard Consulting
EPC Plant
Power & Energy
Oil & Gas
Pressure Vessel
Cryogenic
Desalination
Wind Power
Special Plant
Module & Offshore
Cranes&MHS
EOTC, Gantry, Goliath
RMQC, BTC, RTGC, LLC
Ship Unloader, CSU, Stacker & Reclaimer
Used Equipment
Used Equipment
Parts Supplying
Automobile Parts
Marine Parts
General Purchasing Parts
EPC contractor | Boiler Heat Exchanger Reactor | HRSG | Power and Energy plant | Incineration and Power Plant | Power transmission and Substation | CFPP | Coal Fired Power Plant | CCPP | Combined Cycle Cogeneration Power Plant | Oil and Gas Plant | Oil storage tank | Oil Refinery Plant | LPG LNG tank | LPG bottling Plant | LPG cylinder manufacturing plant | Gas booster station | Gas processing plant | Petrochemical plant | Spherical tank | Cryogenic plant | Desalination plant | Water treatment plant | Wind Solar Hydro power plant | MTI